Delivery - Piece Count with Barcode Scanning

Owned by Gord More (Unlicensed)
Last updated: Jan 26, 2017

 From your Pick Up / Deliveries Screen,

Tap a Shipment to open it in the Trip Details Screen.

Tap the "Deliver" button, 

Then you will see this screen, which shows all the shipments dispatched to this driver for this Delivery location.

The Delivery address must be exactly the same for all shipments. For example, if you are using 2 address records for the same Delivery address and 1 has "Main St" and the other has "Main Street", then not all the shipments will appear. Please work to ensure your address books are clean as a messy address book effects more than just this functionality.

Then scan each barcode on each shipment.

  1. If you are using a phone with an onboard laser scanner (like the TC-55) point the laser at the barcode on the shipment.
  2. If your phone does not have an onboard laser scanner, click the .
     

This screen works by scanning a barcode. If you do a high volume of barcode scanning, IDS strongly recommends the use of a phone with an onboard laser scanner. Currently, (January 2017) IDS recommends the Zebra/Motorola/Intermec TC-55.  For more details on the TC-55, please click here. 

When you scan a multi-piece shipment you will notice the app keeps track of how many pieces you have scanned.

If you scan a shipment that is not on your device (because it has not been dispatched to you), then the following will appear:

or this pop up:

If you overscan a shipment, you will see this:

To reset your scan, just tap the trip so that you see this pop up:

Then select "Reset Scan for this item", then:

  1. If the message was that the item was not for this location, either have that shipment dispatched to the driver or dont scan the shipment again.
  2. If the message was an overscan, then scan the barcode for that shipment again.

As shipments have been scanned, they will disappear. When all the shipments have been scanned, then the screen will look like this:

If a piece is missing, continue and the IDS 2 App will mark the shipment or piece as "Undeliverable."

Then the follow screen will appear.

If you are required to do so, enter in a POD Name into the POD Field.

To capture a signature, click the "Sign" button, then the following screen appears.

  2. To capture a Signature, simply have the receiver sign the screen with their finger or a stylus.
  3. If you need to recapture a signature, touch "clear" on the top right hand side of the screen. 
  4. When you are done, click "OK" to return back to the previous screen

The IDS 2 App can be set so that a driver must capture a POD and a Signature to complete a shipment.

When done, click on the "Delivery" button.