Page Comparison

This article describes how to Dispatch Shipments in IDS 2 Dispatch PC Client.

To Jump to a Section in this article, click on a link below:

How to Create Dispatch Boards

How to Dispatch

How to Create Dispatch Boards

...

1. Double Click in the "drivers" column for the shipment you wish to assign.
   
2. This will activate the driver dropdown
   
3. To select a driver from the dropdown, you can:
   1. start to type the name of the driver.
   2. use the scroll bar located to the right of the dropdown.
      
   3. use your middle mouse wheel (if you have one).
4. When you have found the driver, left click to select that driver
   
5. You will now see the selected drivers name in the driver's column for that shipment.
   
6. repeat Repeat steps 1 to 5 for all the shipments you wish to assign.
7. When you have finished, then highlight all the shipments from above, by doing one of the following:
   1. holding down the "Ctrl" key, then selecting each shipment.
   2. holding down the "shift" key, then selecting the top record, then selecting the bottom record.
   3. If its just 1 shipment, just select it.
8. When all the shipments have been selected, they will be highlighted in blue.
   
9. Then click the "Assign Driver" button on the bottom of the screen.
   
10. The highlighted shipments will then be removed from the Dispatch Board.

...