Page Comparison

...

You will be using the IDS 2 PC Client's Route Module. These screens use MicroSoft's Combo Boxes. For assistance on how to use the Combo Boxes, please read this article: How to use combo-boxes

Creating a List of Non-RC'ed Shipments.

...

1. From your List of Non-RC'ed Shipments.
2. Look at for the Facility ID / Nursing Station in the Shipment's Destination Company Name, in the company name. For example:
   
   The Facility ID / Nursing Station is 340-CLERMAB
3. Launch the IDS 2 PC Client and navigate to the Routes > Account Tab. Routes Tab. 
   Image Added
4. Select your Pharmacy Location from the "Company to define the route for":
   Image Added
   Image Added
5. Then select the route in the "Customer's route" drop down.
   Image Added
   Image Added
   
   
6. Once the route addresses have loaded on the right hand side of the screen, search for the Facility ID / Nursing Station from point 2 above.
7. You can add either / and:
   1. The human readable name. Example: "Laurels of Milford (PC) (340-CLERMAB)"
   2. Just the Facility Id / Nursing Station:  340-CLERMAB
8. IF! The address is correct, then 1 or 2 things happened:
   1. The Pick Up Time is not correct, see Tweak #1 above.
   2. The address for the facility is connected to 2 routes for exactly the same time. If this is the case, adjust the route definitions such that the facility only shows in 1 route for that 1 time period.

Related articles

...